A required device isn’t connected or cannot be accessed with error

3) Enter into the safe mode by pressing the enter button on the option of safe mode. 2) Then a list of the installed hardwares will appear on your screen. If the error occurs after you’ve updated Windows XP, several causes could be BIOS update, RAM issue, or an incompatible driver. This error code is related to the fact that a program or driver is not compatible with the version of Windows. In some situations, BSODs are followed by the immediate reboot of the system, and you don’t have the time to identify the cause of the error. In these times, you can use BlueScreenView to view the BSOD logs.

This will let you know if the problem is with the hard drive, your computer, or the cables. After completing these steps, if Windows Update detects that your device is using an older version of the driver, it’ll download and install the most up-to-date driver available. After completing the steps, you should be able to start using the storage as usual. If you can’t get the storage online, and it was recently available, that could mean the drive is corrupted, disconnected, or it’s not getting power. There are multiple ways to solve the issue of your computer automatically checking the disk at startup.

Making Sense of BSOD Data

To fix Windows 10 Repairing disk errors using Automatic repair option, you need an installation disk or USB to create a media creation tool for Windows 10. Windows 10 sure comes loaded with some exciting new features. However, this doesn’t mean you are out of problems while working on the OS. Unfortunately, Windows 10 also brings with it some errors which hampers your work, sometimes. Getting stuck on the start screen with a message which says – “Repairing disk errors. This might take over an hour to complete.” is one such annoying situation to endure.

  • With Disk Drill, you can recover over 200 file formats from all storage devices without any expert skills.
  • Of course, this won’t recover your files if Windows 10 deletes them, but at least you’ll be on a more stable version of the OS.
  • Select the open with Internet Explorer option.

Hard bad sectors occur when the media is physically damaged, like when a speck of dust lands on the disk or the read/write head makes contact and ruins the surface. CHKDSK should identify and remove bad sectors or corrupted data so that your computer will work normally again. You can use this command prompt just the same as any other, and you can run CHKDSK on your Windows drive before it boots.

Thankfully, all the repairs related tools are free to use. Just like any other software, Windows 10 can also face problems while working. Sometimes the network or audio stops working, and in worst cases, Windows slows down to a crawl or doesn’t boot at all drivers for windows. You may also need to update your mouse or touchpad driver.

If you don’t have the patience or time to wait so long, you can bypass the auto-scanning and use other methods to scan and repair the drive manually. And if you get this message during every startup, it’s recommended you follow the instructions too. Read errors are among the most common hard disk errors. The error message “A disk read error occurred” indicates that the operating system is unable to access and read the hard drive. Possible causes are incorrect BIOS configurations, a damaged hard drive, faulty cable connections, and other common problems.

Solution 5: Update Your Drivers

If the problem is related to a device, uninstall and reinstall the device, and then ensure those drivers are up to date. I have received BSOD at a 50% chance when logging off or logging on to the PC after having upgraded to 1809. Could not use any method to overcome the situation. Even minidumps produced were useless according to debug tools. Luckily on rare occasions my logoff process was prevented by OneDrive.exe stuck in syncing OS Settings apparently. I checked OneDrive.exe and it got stuck in syncing some files as simple as a batch or a docx as large as couple of kbytes.

5 Fixes

It should be noted that it is best to save the recovered file to an external hard drive or USB flash drive. There are no normal solutions to repair hard bad sector. All you can do is to do a low-level format on the drive, resetting the blocks, clusters and sectors of the hard drive. Before moving towards the resolution for disk errors, let’s discuss the reasons for the issue.

Leave a Reply

Your email address will not be published. Required fields are marked *